Tekin ROC412 Rock Crawler Motor
Information
Tekin's Element Proof ROC412 offers protection from the elements, giving you the power to take on the trails or track without fear of water, mud or snow! Designed for heavier trail or rock racing rigs, the ROC412 delivers more torque and more power on demand. Using a 4-pole 12-slot motor design, the ROC412 harnesses the benefits of brushless efficiency and extreme amounts of torque to stay on the trail longer with more power.
Couple the ROC412 with an RX4 or RS GEN2 speed control for the smoothest brushless crawling system available. Rock Racing power and Crawling precision are at your disposal
Features
Element Proof design tackles Water, Mud and Snow*
Crawler, Rock Race and Trail Rig Specific
4 Pole 12 Slot High Torque Motor Design
18.5mm Rotor provides superior Torque and Braking Power
CNC Machined 6061-T6 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnets
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity and Efficiency
Low Resistance, High Power Solder Tabs
Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
Anodized End-bell plates maximize corrosion and wear resistance
High RPM ABEC-5 Precision Bearings
Oversized Front Bearing adds Durability
Rebuild-able Design
* Element Proof ESCs and Motors are specially designed to withstand water splashes and are not meant to be submerged. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.
The ROC412 EP is not intended for operation while submerged in liquid.
Anytime your motor sees water it is important that you perform the proper after run maintenance. Warranty does not cover neglect, lack of maintenance, bearings, rust or any damage that may occur if the motor is submerged in water.
Specifications
Voltage Limit: 5700kV - 2S LiPo
4600kV - 2S LiPo
3100kV - 3S LiPo
2300kV - 4S LiPo
1800kV - 4S LiPo
1200kV - 6S LiPo
500kV - 6S LiPo
Weight: 6.3oz / 179g
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Motor Diameter: 35.85mm / 1.40"
Motor Length: 52.5mm / 2.10"
Bearing Dimensions: Front: 5 x 14 x 5mm
Rear: 5 x 11 x 5mm
Rotor Size: 18.5mm
Rebuildable: Yes
TRAIL & ROCK RACE
1:10 4WD Trail Truck
1:10 4WD Rock Racer
Contents
Element Proof design tackles Water, Mud and Snow*
Crawler, Rock Race and Trail Rig Specific
4 Pole 12 Slot High Torque Motor Design
18.5mm Rotor provides superior Torque and Braking Power
CNC Machined 6061-T6 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnets
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity and Efficiency
Low Resistance, High Power Solder Tabs
Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
Anodized End-bell plates maximize corrosion and wear resistance
High RPM ABEC-5 Precision Bearings
Oversized Front Bearing adds Durability
Rebuild-able Design
* Element Proof ESCs and Motors are specially designed to withstand water splashes and are not meant to be submerged. Included dielectric grease must be used on the sensor and fan port connections to protect them from shorting.
The ROC412 EP is not intended for operation while submerged in liquid.
Anytime your motor sees water it is important that you perform the proper after run maintenance. Warranty does not cover neglect, lack of maintenance, bearings, rust or any damage that may occur if the motor is submerged in water.
View your shopping basket or Browse other items in 1/10 Scale ESC & Motors.
