Carburetors and parts

Hot up Modified Race Carb Kit

NZ$ 119.00
Viet Nam Carb Kits

Carb kit for the Vietnam Modified Carb

NZ$ 22.00
RCP Complete Carburetor Linkage Kit

NZ$ 38.00

Out Of Stock
Zenoah Big Venturi 13.5mm WT-1048 Carb Upgrade for Marine Engines

Big Bore Racing Carb from Zenoah (Walbro WT-1048),

NZ$ 135.00
Zenoah 26cc Big Venturi Racing Carb Kit wt-257 / wt-1027

The 1027 is identical in every way to the 257 just renamed by Zenoah/Husqvarna Works well on most Zenoah engines and clones. Substantially outperforms the stock WT-644 carburettor on Zenoah G231PUM / G260PUM engines.

NZ$ 128.00
Walbro WT-990 Hi-Performance Carb

Walbro WT-990 Hi-Performance Carb
5756550-01

NZ$ 159.00
Air Inlet Manifold 42MM

Air Inlet Manifold 42MM

NZ$ 37.40
NZ$ 32.50
Alloy Carb Manifold

Alloy Manifold

NZ$ 37.40
NZ$ 32.50
Carb Needle clamp

Carburetor Adjustable Clamp,only suitable for Walbro Carburetor 257 and 1048

L=20mm
D=4mm
H=7mm

NZ$ 9.80
NZ$ 8.50
Carburetor Bolt Set (M5x50)

Carburetor Bolt Set (M5x50)

NZ$ 4.45
NZ$ 3.90
Carburetor linkage mount for 26cc-32cc Zenoah Engine

Carburetor knuckle for 26cc-32cc Zenoah Engine

NZ$ 32.80
NZ$ 28.50
G23LH/GSR40 Stock Carb Rebuild Kit K20-WYJ

G23LH/GSR40 Stock Carb Rebuild Kit K20-WYJ

NZ$ 24.40
NZ$ 22.00
HI Speed Needle for WT-257

HI speed adjustment needle for Walbro WT-257 carburetors. Also compatible for use with other WT-series carbs such as WT-668, WT-603, WT-813, and WT-990.This is the needle needed to use a Needle Clamp

NZ$ 6.80
NZ$ 5.90

Out Of Stock
Low Speed Needle for WT-257

Low speed adjustment needle for Walbro WT-257 carburetors. Also compatible for use with other WT-series carbs such as WT-668, WT-603, WT-813, and WT-990.This is the needle needed to use a Needle Clamp

NZ$ 6.80
NZ$ 5.90

Out Of Stock
Throttle Shaft for WT813 Carbs

'
Throttle Shaft for Walbro WT813 Carbs with Accel Pump

NZ$ 11.45
NZ$ 9.95
Throttle arm suit Walbro carbs

Throttle arm suit Walbro carbs

NZ$ 21.20
NZ$ 18.50
Throttle linkage suit Zenoah with 48mm bracket

Throttle linkage suit Zenoah with 48mm bracket
37mm bolt hole spacing on main bracket

NZ$ 38.55
NZ$ 33.50
WALBRO CARB INTAKE FITTING

WALBRO CARB INTAKE FITTING'

NZ$ 9.25
NZ$ 9.00
WALBRO CARB REBUILD KIT K10-WAT

Walbro WT-813 / WT-990 / WT-257 / WA-167 / WT-771 Rebuild Kit K10-WAT

NZ$ 19.55
NZ$ 18.00
Walbro 102-284-1 Low Speed Needle

Walbro 102-284-1 Low Speed Needle

NZ$ 6.80
NZ$ 5.90
Walbro 102-479-1 Hi Speed Needle

Walbro 102-479-1 Hi Speed Needle

NZ$ 6.80
NZ$ 5.90
Walbro Carb Rebuild Kit K20-WAT

Walbro Carb Rebuild Kit K20-WAT

NZ$ 30.00
Walbro Carburetor Metering Diaphragm Assembly

Walbro Carburetor Metering Diaphragm Assembly'for WT / WA series carburetors. This is the same part that comes in the rebuild kits, Walbro Part # 95-526.

NZ$ 10.00
Walbro Carburetor Top

Walbro Carburetor Top

NZ$ 13.80
NZ$ 12.00
Walbro Primer Bulb

Walbro Primer Bulb

NZ$ 9.75
NZ$ 8.50
Walbro Throttle Shaft WT-

Walbro Throttle Shaft WT-

NZ$ 10.90
NZ$ 9.50
Walbro WT-668 Carburetor

Walbro WT-668 Carburetor

NZ$ 120.00
Walbro WT-813 high performance carburetor

Walbro WT-813 high performance carburetor for R/C use. This carby has an accelerator pump to remove any 'bog' that standard carbs can suffer from when tuned for maximum power. Fits all 'Zenoah' and 'CY' R/C engines.

NZ$ 129.00
Zen/CY Inlet Manifold STD

Isolator Block

NZ$ 17.25
NZ$ 15.00
av512 - Zenoah Carburetor Spacer

av512 - Zenoah Carburetor Spacer

NZ$ 9.80
NZ$ 8.80
Replacement Walbro Throttle Shaft Return Spring

NZ$ 6.50
Walbro Carb Choke Lever

NZ$ 6.50
Gas linkage for Zenoah, silver 26cc - 29cc

Gas linkage for Zenoah, silver

NZ$ 32.80
NZ$ 28.50
ALLOY CARB THROTTLE LINKAGE

ALLOY CARB THROTTLE LINKAGE'''

NZ$ 9.80
NZ$ 8.50
Alum Carburetor arm

NZ$ 10.95
NZ$ 9.50
Throttle Arm

Throttle Arm

NZ$ 9.80
NZ$ 8.50
WT Carburetor Low Speed Spring

Low speed adjustment needle spring for Walbro WT series carburetors.

NZ$ 6.50
Zenoah PUM Intake Funnel

Zenoah part # 848ES08300.

NZ$ 9.50

Website Builder - Website World

Carburetors and parts

RC PARTS