Fast Metal Epoxy (28.3gm)

Fast Metal Epoxy (28.3gm)
NZ$ 13.00 including GST
Purchase Qty:

Metal Epoxy
Quick Setting Metal Epoxy Adhesive is perfect for repairing appliances, tools, etc.
It bonds most metals including copper, steel, stainless steel, aluminum, brass and iron. This product sets in only 5 minutes and the final cure color is light gray.

Works Best On:

  • Aluminum
  • Brass
  • Copper
  • Iron
  • Stainless Steel
  • Steel

1. Surfaces should be clean and dry, free from oil and grease.
2. Roughen surfaces with emery cloth or sandpaper for best results.
3. Dispense from container following package directions & mix thoroughly until color is uniform, approximately 1 minute.
4. Apply to both surfaces and mate parts together.
5. Remove excess epoxy immediately with denatured alcohol.
6. Sets in 4-6 minutes at room temperature (77°F or 25°C) with full cure in 24 hours.

Technical Specifications:
Initial color: Light gray
Final color: Hazy-clear
Maximum Gap: .25”
Hardness, Shore D: 75-85 (After full cure)
Shear Strength, Steel: 2500 psi (± 20%); Aluminum: 840 psi (± 20%)
Set Time: 4-6 minutes @ 65-80°F
Handling Time: After 1 hour
Full Strength: 24 hours
Operating Temperature Range:-40 to 300°F (-40 to 149°C)