THE JQRacing Front Gearbox
THE JQRacing Front Gearbox, (also known as bulkhead) includes both halves of the gearbox and a sway bar holder. The gearbox is installed on the front of the chassis, and is the component that houses the front differential. I am super happy with the gearbox design. The front gearbox is a tough part to get right. It needs to be rigid enough to keep the gearmesh right under great tourque from the drivetrain and impacts from hard landings. We were able to produce the gearbox so no shimming is required! Just pop the diff in, tighten the gearbox screws, and you are good to go! Due to the tight tolerances, some gearboxes leave the mesh slightly tight. This is not a problem. Just run the car and it will break in. However, make sure you push the diff pinion bearings in all the way!